95 °C Compact Structure Industrial Hot Water Boiler For Multi Industrial
Industrial Hot Water Boiler for multi usage
1. Industrial Hot Water Boilerrealizes automatic combustion and automatic control
2. Three-way structure with full wet back, good water adaptability
3. Hot water output temperature: 95 ℃
4. Working pressure: 0.7mpa, 1.0mpa
5. The heating area: 1000-10000 ㎡
Our Industrial Hot Water Boiler advantages
1. High thermal efficiency and low combustion cost:
1. The three-pass structure is adopted to enhance heat transfer performance.
2. Adopt corrugated furnace, increase the heating area, improve the free expansion degree of the boiler, and improve the hot sales data.
3. The overall use of bellows structure, eliminate the stress generated by welding, improve heat transfer performance.
2. Safe and reliable Industrial Hot Water Boiler design
1. Design the tie rod to increase the strength of the tube plate and prevent cracking
2. Explosion-proof door design to prevent boiler explosion and improve the safety factor
3. Double water level gauge, double spring safety valve redundancy design, safe and reliable.
3. Long service life
1. Adopt new refractory materials, strong curing, will not fall off after vibration.
2. High overload capacity design, reasonable configuration, reduce equipment fatigue damage,
WNS0.7-0.7/95/70-Q(Y) technical parameter details
| Compact Structure Industrial Hot Water Boiler For Multi Industrial |
| Name | unit | value | remark |
| rated thermal power | mw | 0.7 | |
| rated design pressure | mpa | 0.7 | about150psi |
| outlet water temperature | C | 95 | |
| return water temperature | C | 70 | |
| water pressure test | Mpa | 1.05 | |
| boiler water capacity | m³ | 1.56 | |
| cool air temperature | C | 20 | |
| exhaust gas temperature(gas) | C | 104.6 | |
| exhaust gas temperature(oil) | C | 108.2 | |
| design efficiency(gas) | % | 92.37 | |
| design efficiency(oil) | % | 92.46 | |
| design gas consumption(gas) | nm³/h | 79.29 | 35.438MJ/kg |
| design gas consumption(oil) | nm³/h | 65.42 | 42.916MJ/kg |
| chamber radiation heating area | m² | 4.757 | |
| convection tube heating area | m² | 18.3 | |
| economizer heating area | m² | 13 | |
| full load exhaust gas density | mg/m3 | <200 | |
| gas blackness | Ringelman blackness | <1 | |
| design fuel | | natural gas(oil) | |
| boiler transfer size | mm | 3200*1420*1810 | |
| transport weight | T | 4.7 | |
This is only the technical datasheet of WNS0.7-0.7/95/70-Q(Y) hot water boiler. For other models,please contact us for details.
Product Tags:
|
|
95 °C Compact Structure Hot Water Boiler Furnace / Multi Industrial Hot Water Boiler Images
|
